This report presents the description and the interpretation of the tests carried out in the third phase of the NEA Working Group on Integrity and Ageing of Components and Structures (WGIAGE) activity...

The seismic design rules for nuclear power plant piping systems that have been in practice since the 1960s have been applied to hundreds of piping supports and seismic restraints for nuclear power pl...

Passive thermal-hydraulic systems are widely used in nuclear reactor safety and design. For example, primary circuits in existing boiling and pressurised water reactors are designed to take advantage...

PERSEO was built at SIET laboratory (Piacenza, Italy) to study a new passive decay heat removal system operating in natural circulation. The main innovation in PERSEO is the presence of two pools con...

At the Nuclear Energy Agency (NEA), the importance of fuel modelling and its improvement through development of phenomenological representations has been recognised and multiple technical groups rela...

This report established by the NEA Working Group on Fuel Safety (WGFS) of the Committee on the Safety of Nuclear Installations (CSNI) compiles the state-of-the-art knowledge on fuel behaviour in loss...

Panda facility under construction. Photo courtesy of the Paul Scherrer Institute

HYMERES phases

First phase (2013-2016)

The main objective of the first phase of the Hydrogen Mitigation Experiments fo...

The Working Group on Fuel Cycle Safety (WGFCS), which is part of the Committee on the Safety of Nuclear Installation (CSNI) of the Nuclear Energy Agency (NEA), held an international workshop on devel...

Rising international interest in increasing fuel burnup limits and fuel cycle length may require fuel enrichment above 5% and high reactivity/high suppression core designs. Based on this interest in ...