• Home
• About Us
  • What's New
  • Press Room
  • Contacts
  • Vacancies
  • Practical Info
  • Register
  • Web Links
  • List of Acronyms
• Work Areas
  • Nuclear Safety
  • Radioactive Waste
  • Radiological Protection
  • Nuclear Development
  • Nuclear Science
  • Nuclear Law 
  • Joint Projects
  • Sustainable Development
  • Civil Society
• Data Bank
  • Nuclear Data 
  • TDB Project 
  • Computer Programs
• Publications
  • By Subject 
  • Recently Published
  • NEA News
  • Policy Papers
• Press Room
• Search

[Program Service | Recent programs]

NEA-0349 STRESSPLOT. (Abstract last modified 01-MAR-1973)


STRESSPLOT, CALCOMP Plot of 2-D Finite Elements Calculation

---

Abstract Table of Contents:

NAME | COMPUTER | PROBLEM | SOLUTION | RESTRICTIONS | CPU | FEATURES | AUXILIARIES | STATUS | REFERENCES | REQUIREMENTS | LANGUAGE | OPERATING SYSTEM | OTHER RESTRICTIONS | AUTHOR | MATERIAL | CATEGORIES |

---

1. NAME OR DESIGNATION OF PROGRAM - STRESSPLOT.


2. COMPUTER FOR WHICH PROGRAM IS DESIGNED AND OTHER MACHINE VERSION PACKAGES AVAILABLE -

To request or retrieve programs click on the one of the active versions below. A password and special authorization is required.

Explanation of the status codes.

Program-name         Package-ID  Status
STRESSPLOT           NEA-0349/01 Tested

Machines used:
Package-ID     Orig.Computer                       Test Computer
NEA-0349/01    IBM 370 series                      IBM 370 series

3. NATURE OF PHYSICAL PROBLEM SOLVED - Computer program to plot results of 2-dimensional finite-element calculations.


4. METHOD OF SOLUTION - Results of finite-element calculations are stored on tape, together with data concerning tapes. Contours are plotted for levels as specified by input.


5. RESTRICTIONS ON THE COMPLEXITY OF THE PROBLEM - Maximum number of nodes = 2000. Maximum number of elements = 1500.


6. TYPICAL RUNNING TIME - 2 min for largest problem.


7. UNUSUAL FEATURES OF THE PROGRAM - A special weighting procedure is included to obtain smooth results near boundaries.


8. RELATED AND AUXILIARY PROGRAMS - MESHGEN, MESHREF, MESHPLOT.


9. STATUS
NEA-0349/01: 01-MAR-1973 Tested at NEADB


10. REFERENCES  - 
- NEA Newsletter of October 1971.
NEA-0349/01:


11. MACHINE REQUIREMENTS - Tapes for data and topology. CALCOMP plotter.


12. PROGRAMMING LANGUAGE(S) USED -
NEA-0349/01: FORTRAN-IV 


13. OPERATING SYSTEM OR MONITOR UNDER WHICH PROGRAM IS EXECUTED - Standard.


14. ANY OTHER PROGRAMMING OR OPERATING INFORMATION OR RESTRICTIONS -


15. NAME AND ESTABLISHMENT OF AUTHOR -
            Joint Research Centre
            21020 Ispra (Varese)
            Italy.


16. MATERIAL AVAILABLE -
NEA-0349/01:
NEA0349_01.001    STRESSPLOT SOURCE PROGRAMME+SAMPLE INPUT          677 records
NEA0349_01.002    STRESSPLOT SAMPLE OUTPUT                           48 records


17. CATEGORIES  - 

- I. Deformation and Stress Distributions, Structural Analysis and Engineering Design Studies
- N. Subsidiary Calculations


Keywords: COMPUTER GRAPHICS, FINITE ELEMENT METHOD, STRESS ANALYSIS, TWO-DIMENSIONAL

---

Home - About Us - Work Areas - Data Bank - Publications - Press Room - List of acronyms - Search