IAEA1314: RELABEL2007, Labels FORTRAN Statements in ENDF Format Processing Programs

Program-name Package-ID Status RELABEL-86.1 IAEA1314/01 Obsolete RELABEL-86.1 IAEA1314/02 Obsolete RELABEL-89.1 IAEA1314/03 Obsolete RELABEL-92.1 IAEA1314/04 Obsolete RELABEL-94.1 IAEA1314/05 Obsolete RELABEL-96.1 IAEA1314/06 Obsolete RELABEL2000 IAEA1314/07 Obsolete RELABEL2002 IAEA1314/08 Obsolete RELABEL2004 IAEA1314/09 Obsolete RELABEL2007 IAEA1314/10 Tested

Machines used: Package-ID Orig.Computer Test Computer IAEA1314/10 Many Computers Linux-based PC,PC Windows

3. DESCRIPTION OF PROBLEM OR FUNCTION - RELABEL labels a ENDF/B preprocessing program so that statement labels are in increasing order in increments of 10 within each routine, and cards are identified in columns 73-80 by three alphanumeric characters in columns 73-75 and sequence numbers in columns 76-80 in increments of 10.

IAEA1314/10:

This version include the updates up to JANUARY 30, 2007.
Changes in ENDF/B-VII Format and procedures, as well as the evaluations themselves, make it impossible for versions of the ENDF/B pre-processing codes earlier than PREPRO 2007 (2007 Version) to accurately process current ENDF/B-VII evaluations.
The present code can handle all existing ENDF/B-VI evaluations through release 8, which will be the last release of ENDF/B-VI.

MODIFICATIONS FROM PREVIOUS VERSIONS:
-------------------------------------
Relabel VERS. 2007-1 (JAN. 2007): NO CHANGE SINCE MARCH 2004 VERSION

4. METHOD OF SOLUTION -

5. RESTRICTIONS ON THE COMPLEXITY OF THE PROBLEM - RELABEL is designed to maintain ENDF/B processing programs which use a restricted set of FORTRAN statements. As such, this program is not completely general.

6. TYPICAL RUNNING TIME - A few seconds.

7. UNUSUAL FEATURES OF THE PROGRAM -

8. RELATED AND AUXILIARY PROGRAMS -
The following programs are all part of the PREPRO2002 package.
ACTIVATE: is designed to create file 10 activation cross sections by
          combining file 3 cross sections and file 9 multipliers
COMPLOT: Compares ENDF/B formatted data from two separate input
         files. Results are in graphical form.
CONVERT: Automatically converts a FORTRAN program for use on
         any one of a variety of: (1) computers; (2) compilers:
         (3) precisions; (4) installations; (5) standard or
         non-standard file names.
DICTIN:  Creates a reaction index for each material.
EVALPLOT:Plots data in the ENDF/B format.
FIXUP:   Reads evaluated data in the ENDF/B format; performs
         corrections and outputs the results in the ENDF/B format.
GROUPIE: calculates unshielded group averaged cross sections,
         Bondarenko self-shielded group averaged cross sections,
         and multiband parameters from data in the ENDF/B format.
LEGEND:  Calculates linearly interpolable tabulated angular
         distributions starting from data in the ENDF/B format.
LINEAR:  Converts cross sections in the ENDF/B format (File 3,
         23, and 27) to linearly interpolable form (in energy
         and cross section) and outputs the result in the ENDF/B
         format.
MERGER:  Selectively retrieves data by MAT/MF/MT or ZA/MF/MT from
         up to 10 ENDF/B data tapes and merges the data into a
         single MAT/MF/MT ordered output file.
MIXER:   Calculates the energy dependent cross sections for a
         composite mixture.
RECENT:  Reconstructs energy-dependent cross sections from a
         combination of resonance parameters and tabulated
         background cross sections in the ENDF/B format.
RELABEL: relabels a ENDF/B preprocessing program so that
         statement labels are in increasing order in increments of
         10 within each routine.
SIGMA-1: Doppler broadens evaluated cross sections in the
         linear-linear interpolation form of the ENDF/B format.
SIXPAK:  Checks all double-differential ENDF/B-VI format data
         (MF=6) and outputs equivalent uncorrelated data (MF=4,
         5, 12, 14, and 15)
VIRGIN:  Calculates uncollided flux and reactions due to
         transmission of a monodirectional beam of neutrons
         through any thickness of material.

9. STATUS
IAEA1314/01: 29-MAY-1989 Obsolete
IAEA1314/02: 29-MAY-1989 Obsolete
IAEA1314/03: 28-AUG-1992 Obsolete
IAEA1314/04: 22-JUL-1994 Obsolete
IAEA1314/05: 07-APR-1997 Obsolete
IAEA1314/06: 11-DEC-2000 Obsolete
IAEA1314/07: 24-JUL-2003 Obsolete
IAEA1314/08: 29-SEP-2006 Obsolete
IAEA1314/09: 10-DEC-2007 Obsolete
IAEA1314/10: 07-DEC-2007 Tested at NEADB

10. REFERENCES -
IAEA1314/10:
- IAEA Nuclear Data Section:
PREPRO2007, 2007 ENDF/B Pre-processing Codes (ENDF/B-VII Tested)
IAEA-NDS-39, Rev. 13, March 17, 2007

11. MACHINE REQUIREMENTS - The package is designed to be used with many machines. Make files for almost all kind of computers are included.

12. PROGRAMMING LANGUAGE(S) USED -
IAEA1314/10: FORTRAN-77

13. OPERATING SYSTEM UNDER WHICH PROGRAM IS EXECUTED - Several OS can be used.

14. OTHER PROGRAMMING OR OPERATING INFORMATION OR RESTRICTIONS -

15. NAME AND ESTABLISHMENT OF AUTHOR -
Nuclear Data Section
IAEA
P.O. Box 100
A-1400 VIENNA
AUSTRIA

16. MATERIAL AVAILABLE -
IAEA1314/10:
General description of the PrePro2007 programs
Documentation
Compressed files for MAC, Readme file for MAC
Author's Make file for PCLinux, Author's LINUX executable
Author's PCWindows compile batch
Author's PCWindows executable
Fortran source files for different platfor
UNIX Makefiles for different platforms
Author's VMS executable, Author's compile command file

17. CATEGORIES -

- M. Data Management

Keywords: ENDF/B, FORTRAN, PROGRAMMING LANGUAGES